How Does the Unevenness of the Coating Surface Affect the Wear Resistance Performance (Part Two)

1. Reducing the Coating Life
   The coating with an uneven surface is more vulnerable to the influence of the external environment, such as dust, particulate matters, etc. These impurities will embed in the uneven areas of the coating, further intensifying the friction and wear. In addition, the uneven surface is also more likely to accumulate water or chemical substances, thus accelerating the aging and corrosion of the coating and further reducing its wear resistance.
2. Affecting the Coating Adhesion
   The unevenness of the coating surface may indicate that the bonding between the coating and the substrate is not tight enough. Insufficient adhesion will make the coating more likely to peel off during the friction process, especially under conditions of high load or frequent friction. This decrease in adhesion will significantly reduce the wear resistance of the coating.
3. Poor Visual and Tactile Effects
   From the perspectives of vision and touch, the uneven coating surface gives people the impression of being rough and of low quality. This decline in surface quality not only affects the appearance of the product but also impacts its actual performance, especially in application scenarios where high surface quality is required.

Conclusion
The flatness of the coating surface is one of the important factors affecting the wear resistance. A flat coating surface can reduce the friction resistance, disperse the stress, reduce the generation of defects, and enhance the overall adhesion and durability of the coating. Therefore, improving the flatness of the coating by using additives such as leveling agents is one of the important means to enhance the wear resistance of the coating.

https://www.siliconeoil.cn/product-liu-ping-ji-iota3000.html